Hair straightener classification

Hair straightener classification

1) in accordance with the hair straightener heating body can be divided into ceramic heating body, heating body and the heating body PTC MCH.

Ceramic heater has the advantages of environmental protection, fast heating speed, generally 30 to 45 seconds can make the surface of the splint temperature reaches 200 degrees. But because the ceramic heating body is more than 1000 degrees in sintering at high temperature, the temperature in the circuit is out of control, will quickly exceed 300 degrees, will burn the fixed heating plate plastic material, so that the heating plate falling off, are likely to be exposed to the user, and burn the skin.

PTC Positive Temperature Coefficient abbreviations, which translates to positive temperature coefficient thermistor, referred to as PTC. PTC is sintered at high temperature, but he surface is the highest temperature in sintering control, according to the requirements of the manufacturer, can be sintered on the surface to about 280, or the manufacturers want any temperature, general is sintered at 230 degrees to 280 degrees. But its disadvantage is heated up to 200 degrees is slower, in general one and a half or 2 minutes. In use, not as a ceramic heating body that keeps at a higher temperature. Straighten hair effect slightly.

2) a hair straightener heating plate material according to different, can be divided into: pure ceramic heating plate, the surface spray ceramic plate, microcrystalline glass plate

Ceramic heating plate has the advantage of environmental protection, good insulation performance, good safety, disadvantage is the long processing time, processing link is much, and because the edge is difficult to deal with very smooth, in the process of straightening hair will slightly pulling her hair.

Aluminum spraying ceramic glaze benefit is easy to produce, also due to mechanical molding, edge is smooth, not pull hair. Because the surface is basin of ceramic glaze, pull the effect is also very good. Shortcomings due to a metal, itself is not insulation, to the internal heating element insulation treatment, to avoid leakage caused unsafe.

Microcrystalline glass application less, is mainly the surface smooth degree is inferior to ceramic glaze, also not easy forming fixed, to the structure of the product was redesigned.

3) hair straighteners from structurally indistinguishable, generally divided into type V and type X two, early comparison of prevalence of type X, but this V type is more popular. Because V not only can straighten hair, streamlined hair straightener, can also be used for curling, more and more with the hair straightener for volume hair stylists.

4) straight hair is different according to the power, divided into cable ghd hair straighteners and wireless charging type hair straightener

Cable ghd hair straighteners namely by connecting the city electricity supply the hair straightener, wireless charging type hair straightener is through a charger for rechargeable battery charging, the battery as a power supply.

Cable ghd hair straighteners may have the advantage of continuous work, drawback is that if a hair straightener design and production control of unreasonable, there will be potential safety problems, in addition to use in a power line will not be easy, the other is carrying is not convenient. Wireless hair straightener benefit is safe, because is tributary power supply, the other is to travel to carry convenient. But the wireless hair straightener is after each charge can only work for 30 minutes to 1 hours.

5) according to the size of a hair straightener can be divided into wide plate, plate, narrow and mini type

Wide plate straight hair straight hair plate length 90MM, width 42MM, board hair plate length is 90MM, width of 24MM, a narrow straight board length is 80-90MM, width of 13-14MM, mini hair straightener plate length 60MM, width 13-14MM.

6) hair straightener in accordance with pull type, can be divided into common type and dry type.

Ordinary hair straightener in pull must be to the hair dryer can begin to pull, wet and dry type can pull the wet hair.Wet and dry type straight hair straight hair plate to 8-10 has a hole, so that water can be changed into steam from the holes out.

7) voltage and export country, China, European plug plugs are inserted into the United States (the United States, leakage protection plug), Japan, Germany, Australia plug plug electric plug, South Africa, Britain, plug plug plug.Voltage: 110V, 240V global universal voltage also, only for a country, a specific voltage or current.